Considered Vincent Parts

We are taking a look at making the following parts. "Sometimes the magic works, sometimes it doesn't." Chief Dan George, LITTLE BIG MAN.

All of my parts interchange and fit with original parts.

Only parts with pricing are in production.

FT208AS - BRAMPTON FORK LEG - OEM part in a fixture - all 4 castings are made in steel and machined, see photo

These will be heavier than the original 8 1/2 pound part. Lost Wax, 4140 Chromoly steel main 4 castings give great detail and strength.

I've received many inquirys concerning the fork leg castings, they are not available separately. Also, I haven't even thought about a completion date for the fork legs. I have a one man shop with no intention of getting in a hurry. Please note that I do make (and have in stock) a significant number of parts for a slow guy.

FT210S - BRAMPTON FORK UPPER TRIPLE TREE- parts in steel

Original part shown.

FF2 - GIRDRAULIC FORK LOWER TRIPLE TREE - parts in steel

Complete FF33AS to be offered. Heat treated, Lost Wax, 4140 Chromoly steel casting with a DOM tubing stem.

F52/13 - COMET FOOTREST HANGAR, Right- parts in steel

As per Vincent supplied originals. This original is a little bent.

F52/13F - COMET FOOTREST HANGAR, FOLDING, Right- parts in steel

Mine will not have the Twin Shifter Lever Slot at the bottom. Also, mine won't look "homemade".

To be used with F72/1 Footrest.

F52/14F - COMET FOOTREST HANGAR, FOLDING, Left- parts in steel

To be used with F72 Footrest and original Comet Brake Cable.

F52/11 - FOOTREST HANGAR (Left Hand)- parts in steel, close to production.

Heat Treated 4140 chromoly to Rockwell 40C.

Twins

F52/12 - FOOTREST HANGAR (Right Hand)- parts in steel, close to production.

The B and early C type using the gear shift linkage . Heat Treated 4140 chromoly to Rockwell 40C.

Twins